NEET MDS Shorts
88048
INI CET
Intensifying screens in radiography use the physical property of fluorescence, where X-ray photons are converted into light photons. This light then exposes the film, which reduces the amount of radiation exposure needed to create an image.
68397
Anatomymuscle of the soft palate is not supplied by the pharyngeal plexus is Tensor veli palatine
15929
Oral medicineCervical rib syndrome commonly produces vascular manifestations due to compression of the subclavian artery and vein. This can cause arm claudication, cold intolerance, and vascular insufficiency. Neurological symptoms may also occur but vascular manifestations are more common.
77349
ProsthodonticsThe occlusogingival height of guide plane flat surfaces should be 2-4mm. This height provides adequate guidance for insertion and removal while maintaining sufficient tooth structure. Less than 2mm provides inadequate guidance, while more than 4mm requires excessive tooth reduction and may compromise pulpal health.
29054
PhysiologyLithocholic acid is excreted in feces due to its insolubility, as it is not efficiently reabsorbed in the enterohepatic circulation.
64645
PeriodonticsEquilibration aims to distribute occlusal forces evenly across the dentition to prevent excessive stress on individual teeth, thereby reducing the risk of mobility, wear, and periodontal issues.
74376
EndodonticsEstablishing drainage is the first priority in acute apical abscess with swelling. This can be through pulp chamber access, incision and drainage, or extraction - whichever provides fastest drainage and pressure relief.
46199
PhysiologyThe increased venous return to the heart causes End diastolic volume increase
32306
INI CET
Functional Residual Capacity (FRC) cannot be measured by simple spirometry because it includes the Residual Volume (RV), which is the air that never leaves the lungs. It requires helium dilution or body plethysmography.
[Image of lung volumes and capacities graph]
92451
Dental Materials
The accepted ratio of polymer to monomer for denture base resin is 3:1 volume, allowing sufficient wetting of the polymer particles.